Tungsten Disulfide Aerosol Spray | cdn11.bigcommerce.com
WS2 provides a convenient option for applying a thin coating of WS2 coating on any type of surface. Tungsten Disulfide aerosol spray enables to reach those places which has hard to reach at an earlier point of time. It is known to bond well with substrates and a coating film is developed. Since WS2 is chemically inert higher temperature lubrication is possible. The loading bearing capabilities are on the higher end as there is no presence of lead. Finally it is not harmful to ozone in any way.
These sprays fall in the dangerous category and more so when you need to send it by air. Hence dangerous fee charges are levied by the shipment companies. It is also known as a dry lubricant where the coefficient of fiction is at the lesser end. In addition it is also known for higher dry lubrication.
More inputs about Tungsten Disulfide aerosol spray
It is one of the lubricious substances of the world and WS2 rolls out superior lubricating properties. This is really hard to match with any other form of substance like graphite. Even Tungsten Disulfide aerosol spraycan be put to use in high pressure and high application situations. The load bearing capacity of the loaded film is higher at 300,000 psi. There are a couple of ways by which you may use WS2 powder.
Firstly the WS2 powder has to be mixed with the wet lubricants like grease or synthetic lubricants. The powder needs to be mixed with 1wt % and 15 wt. % as necessary with oil or grease. Not only it is going to enhance the temperature but the lubrication properties will be at a higher level.
Secondly it points to coating the WS2 powder with dry lubricant. It is possible to coat the powder at 120 psi as this is not going to require any form of binders. Even the spraying is something that can be done at normal temperature. The coated film will be 0.5 micron thick as the coating applications are already established in many of the areas.
No comments:
Post a Comment